Category Archives: Projects

DIY Sweater Alterations for the Craft-Impaired

I don’t normally consider myself craft-impaired. Within my realm of experience, I think actually I am pretty good. But my realm of experience is mainly in rubber-cementing decorative papers and doodads to greeting cards and a very on-again-off-again relationship with knitting. A long time ago I played around with polymer clay and a little bit of wire-wrapped jewelry. I was never that great with the jewelry — the necklace I made was mainly about finding the right pieces to put together in the right way. Sewing is another thing I am on-again-off-again about, and I’ve never really enjoyed it, perhaps because I never did enough to be comfortable. And of course for the last six years, I didn’t often have access to a nice sewing machine.

At any rate, when I discovered the new dress a day blog, with all these great transformations that seemed so quick and easy I thought, I could do this, it would be perfect for me! Even when I have money for clothes, I have to pass up stuff I like all the time because I never quite grew to adult size according to American clothing manufacturers. But I live in a small apartment with no equipment (even my papercraft and knitting supplies are being stored right now), and as I quickly discovered, sewing machines are expensive. The reviews of the “cheap” (~ $200) machines all suggest they are not worth buying because universally they are only good with thin cloth and light sewing, and the #1 best thing a sewing machine can do for me is let me shorten my jeans. Even the “short” length jeans I buy end up with ragged hems from dragging on the ground. There’s no way I am going to spend money on a sewing machine that can’t handle denim.

But! I wanted to do something. So I went to Goodwill and found this 90% wool sweater that was too big and boxy for regular wearing, but seemed like a prime candidate for taking in and turning into a cardigan.

And I found this tutorial and knew this is what I wanted to do with this sweater. And THEN Jo-Ann had all these Cyber Monday deals plus free shipping on all orders, and I thought, it’s one sweater, I did some hand sewing in middle school home ec, I can do this. And dye it! I’ve dyed small batches of yarn with kool-aid, grown-up acid dyes on a whole sweater can’t be that much harder, right?

And so, my craft-impaired adventure began. And now you too, dear reader, can learn how to dye and alter a sweater without relevant experience, proper equipment or a clear plan for what the whole ordeal would entail. I figure a lot of the people who read these craft-a-day blogs are not coming to their own projects with nearly the experience or investment in equipment that the bloggers themselves have, and my mishaps could be instructive as well as entertaining.

I’m barely half-way through the whole transformation, but here’s a sneak peak at some side effects of today’s dyeing efforts.

(sadly, the blue does not show up as dramatically in the photo)

Oof

Edit: I ended up with 3rd place in the competition, and literally won $15. Big money! Sarcasm aside, I’m pretty happy about it, considering how much I stressed out over making the poster.

Still busy! Still making things! Still no extra energy or desire to post about it. But I made a poster! And printed it out and presented it this morning to a panel of Informatics and Computer Science professors and I could maybe win like $15 if they like it.

You can look at a PDF of my poster if you really want to.

And I made a video of my prototype, and showing a little bit of the development over time.

I always want to add “made list of things I made”

note: while I was working on this post I decided to schedule it for tomorrow morning since I’d just posted the capstone thing. And then I spent an hour writing about arduino problems and decided people could just deal with having more than one post from me show up at a time, but once I’ve “scheduled” a post in wordpress rather than publishing it immediately, I don’t seem to be able to switch back to immediate publishing. And I guess wordpress’s clock is not set to the same time as me, because I scheduled it for two minutes in the future and it didn’t show up. Of course I can’t find a way to discover what time the scheduler thinks it is. So…whenever this post gets published, it will be more than a few hours after I finished writing it. I mention it because, you know, interaction design blog, and this was definitely an unnecessarily irritating interaction..

The making of things continues!

  • slightly fewer than a million organizational/planning emails, but lots still
  • several pages of my written spring capstone report
  • a report on the progress of our HRI project so far
  • hot cross buns
  • a lot of progress on my arduino independent study project
  • less progress on my arduino capstone project. I thought I was so clever for finding a timer code library that I could use, but it turns out it’s really difficult to make this kind of timer work the way I want, given how my project is set up. So I guess I’ll be going back to my old timing strategy.
  • Peruvian lentils and rice. The recipe sounds fussy, but it’s not so bad. It’s not completely simple, but I’ve made more complex recipes with more disappointing results. Although I guess I don’t know what the true Peruvian experience would be, because instead of the special chili paste I used the last of a jar of chipotles in adobo sauce that have been sitting in my fridge for a month. I thought the smokey chipotles were lovely in this dish.
  • along with classmates in my Tech for Social Good class, the foundations of a concrete plan for how to run an IT clinic to benefit local nonprofit organizations. It’s been a long and frustrating process, but after finally putting together a presentation with most of our ideas, I’m finally beginning to believe this thing could actually get started in the fall. It will start small, for sure, but it could start, and get things accomplished. I may even be disappointed that I won’t be around to see it
  • HRI reading responses
  • finally that post about my capstone lit review. the next post will be about primary research

I’m doing some testing with my independent study prototype this evening (which is basically a project branching off my main capstone work), while I’m here doing work on my computer, and I keep having to mess with it. The tricolor LEDs I’m using seem to work differently when powered by a 9-volt battery than when via USB cable into my computer. I assume this has something to do with the greater…current or power or whatever from the battery, but I don’t understand why. I clearly do not know enough about electricity.

Continue reading

Capstone pt 2: electric lit review

The first part of my capstone research began with a lit review. I looked for literature in three main areas: the psychology of flow experiences, ergonomics and healthy computing, and task interruption/disruption. I don’t really expect people to read this stuff, and I’m going to be a bad academic and not cite things properly (I will include my bibliography at the end though), mainly I’m writing this as practice for summarizing things for my presentation. Skip to the end of the post for the relevant conclusions I’ve drawn.

Continue reading

The story of my capstone, pt. 1: a topic is born

I started this post two weeks ago, but like I said, I’ve not been so good at finishing things lately. But all that’s changing now! So here’s part 1 of a series of posts about my capstone work so far.

In the fall of 2009, I began working on my capstone project, the HCI/d program’s equivalent of a master’s thesis. It is a design project that I carry out on my own, over the course of two semesters, and required in order to graduate.

I began the process by asking myself what topics I was interested in and what problems I care about. Both of those questions have long lists of answers, so the trouble was figuring out something that would be 1) a design problem 2) appropriate for a human-computer interaction design program and 3) doable, given the constraints on my time and resources.

That turned out to be more difficult than I’d anticipated. I care about a lot of problem that are not easily addressable by some kind of digital/computing artifact, or involve issues or populations that would present logistical difficulties for me to work with (you should have seen my adviser’s face when I told him I was interested in prison reform and prison education programs). Really, the trouble is in my heart what I want to do is save the world, but my head is afraid of taking on the challenge.

So after quite a bit of fretting and feeling overwhelmed, I met with Erik Stolterman to talk about my problems, and after 10-15 minutes of him nodding and asking questions and looking slightly concerned, I mentioned that I had thought a little bit about my own problems with healthy computing habits and preventing repetitive stress problems, and his response was much more enthusiastic. We talked about the possibilities there for a few more minutes, and I realized he was right, and I really could do a lot with that topic, and it even tied in with my interest in embodiment and the importance of respecting our embodied experience and limitations, and in physical computing. And so, I had a capstone topic.

Next time: starting research!

Secret Christmas Project!

Between the various family outings, visiting high school friends, the solid cloudy skies since Christmas, the utter lack of bright, direct lighting in my house, and the fact that my mother actually wanted to wear her gift, it has occurred to me that I should have taken photos of it before I wrapped it. But I finally have some good ones.

Anyway, last year I got my mother these earrings for Christmas, and she loves them. So I thought this year I would get her a matching necklace. But the seller doesn’t have anything like them anymore, and neither does anyone else on Etsy. Clearly it would be up to me to create such a thing. So I searched the internet and found a place that sells matching beads, bought a gold chain and assorted findings, and set to work.

glass beads

I had a basic idea of the look I wanted, relatively simple with one teardrop bead in the middle and round bead on either side, so then I played around with spacing and how to incorporate the crystal accents. I had a little trouble manipulating the eye pins and of course I wanted everything I did to be perfectly even and round, but several sets of impartial eyes assured me that it looks good anyway. Overall I’m quite happy with it, and so is my mom.